More About Precipitation

There are many different types of rain gauge. A couple more examples are shown here. Remember that it is important to put your gauge away from anything which might stop the rain getting into the gauge. You do not want a tree or a wall acting like an umbrella.

When you have finished reading about this you may want to return to Precipitation or the Collecting Data page.

Stopping Evaporation

It would be very bad if the rain in your gauge evaporated before you took your readings. Some gauges have an outer container with a funnel which channels the rain into an inner measuring container. The example on the right has had its lid removed to show the inner container.

Keeping Your Rain Gauge Stable

Here is the gauge above placed into a earthenware tube. This stops it from being blown over by the wind or accidentally being kicked over.

Securing a Rain Gauge

This type of gauge can be mounted on a post or fence. Here it is shown slotted into its mount. Note how the gauge has been placed so that its funnel is above the post. If it were not placed like this the post would shield the gauge from the rain and the readings would not be accurate.

The Funnel

Rain gauges are made with the funnel the correct size to produce appropriate readings. If you use a specially manufactured gauge you will be able to compare your readings with others. Although it is fun to make your own rain gauge, it is hard to make one as accurate as the bought ones.

Automatic Rain Gauges

When you are away you could leave an automatic rain gauge taking readings for you. These should be placed just as carefully as ordinary ones, well clear of anything that would stop the rain from reaching the funnel.
See more about these types of devices on the ICT and the Weather and More about ICT and the Weather pages. Some are stand-alone devices and some are built into weather stations.